在快节奏的生活里，外卖成为不少人的用餐选择。但当打开包装发现汤汁四溢，难免影响心情。一次性外卖打包盒想要打好 “防漏保卫战”，需要在多个设计细节上下足功夫，每一处巧思都是防止渗漏的关键。

　　In the fast-paced life, takeout has become a dining choice for many people. But when you open the packaging and find the soup overflowing, it inevitably affects your mood. To effectively defend against leakage in disposable takeaway packaging boxes, it is necessary to put in a lot of effort into multiple design details, and every clever idea is the key to preventing leakage.

　　盒体与盒盖的密封结构是防漏的第一道防线。常见的扣合式设计中，盒体边缘通常设有凸起的卡槽，盒盖对应位置则有向内凹陷的卡扣，二者精准咬合。为了增强密封性，卡扣与卡槽的接触面会设计成锯齿状或波浪形，增加摩擦力的同时减少缝隙。一些高端设计还会在盒盖内侧加装一圈软质密封条，材质多选用食品级硅胶或弹性塑料，当盒盖扣合时，密封条紧密贴合盒体边缘，如同给盒子戴上了 “防漏口罩”，哪怕遇到颠簸晃动，汤汁也难以渗出。

　　The sealing structure between the box body and the box cover is the first line of defense against leakage. In common snap fit designs, the edges of the box body are usually equipped with raised slots, and the corresponding positions of the box cover have inward recessed buckles, which precisely engage with each other. In order to enhance sealing, the contact surface between the buckle and the slot will be designed in a serrated or wavy shape, increasing friction while reducing gaps. Some high-end designs also add a soft sealing strip on the inside of the box cover, often made of food grade silicone or elastic plastic. When the box cover is closed, the sealing strip tightly adheres to the edge of the box body, like putting a "leak proof mask" on the box. Even if it encounters bumps and shakes, the soup is difficult to seep out.

　　盒体的结构设计同样不容忽视。底部的弧度和厚度对防漏至关重要。打包盒底部通常会设计成微微向内凹陷的弧形，这样的造型能让液体自然向中心汇聚，避免因晃动流向盒壁缝隙处。同时，底部厚度会适当增加，一般比盒身其他部位厚 20% - 30%，增强承重能力和抗冲击性，防止因外力挤压导致底部破裂渗漏。对于盛装汤汁较多的菜品，盒体还会采用分层设计，上层放置固体食物，下层专门设置密封的汤盒区域，彼此独立，即便汤盒轻微晃动，也不会影响上层食物，从空间布局上降低渗漏风险。

　　The structural design of the box cannot be ignored either. The curvature and thickness of the bottom are crucial for leak prevention. The bottom of the packaging box is usually designed with a slightly inward concave arc shape, which allows the liquid to naturally converge towards the center and avoid flowing towards the gaps in the box wall due to shaking. At the same time, the thickness of the bottom will be appropriately increased, generally 20% -30% thicker than other parts of the box body, to enhance load-bearing capacity and impact resistance, and prevent bottom rupture and leakage caused by external compression. For dishes with a lot of soup, the box body will also adopt a layered design, with solid food placed on the upper layer and a sealed soup box area set up on the lower layer, independent of each other. Even if the soup box shakes slightly, it will not affect the upper layer of food, reducing the risk of leakage from the spatial layout.

　　材质的选择直接影响防漏效果。优质的外卖打包盒多采用高密度聚乙烯（HDPE）或聚丙烯（PP）材质，这类材料分子结构紧密，具有良好的防水性和抗渗透性，能有效阻挡液体渗透。同时，材质的韧性也很关键，在受到外力挤压时，不会轻易出现裂纹。有些打包盒还会在表面进行特殊涂层处理，比如添加纳米级防水层，让液体在盒体表面形成水珠状滚落，进一步提升防漏性能。此外，材质的耐热性也与防漏相关，高温食物盛装时，若材质不耐热变形，会导致盒体与盒盖之间的密封结构失效，所以选择耐高温的材质是保障防漏的基础。

　　The choice of material directly affects the leak prevention effect. High quality takeaway packaging boxes are often made of high-density polyethylene (HDPE) or polypropylene (PP) materials, which have a tight molecular structure, good waterproof and anti-seepage properties, and can effectively block liquid penetration. Meanwhile, the toughness of the material is also crucial, as it will not easily crack when subjected to external compression. Some packaging boxes also undergo special coating treatment on the surface, such as adding a nanoscale waterproof layer, which allows the liquid to form water droplets on the surface of the box, further improving the leak proof performance. In addition, the heat resistance of the material is also related to leak prevention. When storing high-temperature food, if the material is not heat-resistant and deformed, it will cause the sealing structure between the box body and the box cover to fail. Therefore, choosing a high-temperature resistant material is the basis for ensuring leak prevention.

　　盒盖的开启方式也与防漏息息相关。传统掀盖式盒盖虽然方便开启，但密封性能相对较弱，为此，不少打包盒采用了旋转式或按压式盒盖。旋转式盒盖通过螺纹结构与盒体连接，旋转拧紧后，盒盖与盒体紧密贴合，形成多层密封；按压式盒盖则通过多个按压扣均匀分布在盒盖边缘，按下时，所有卡扣同时发力，将盒盖牢牢固定在盒体上。这些设计不仅提升了密封性，还能在一定程度上防止用户在打开过程中因操作不当导致汤汁洒出。

　　The opening method of the box cover is also closely related to leak prevention. Although traditional flip top box covers are convenient to open, their sealing performance is relatively weak. Therefore, many packaging boxes adopt rotating or pressing box covers. The rotating box cover is connected to the box body through a threaded structure. After being rotated and tightened, the box cover is tightly attached to the box body, forming a multi-layer seal; The press type box cover is evenly distributed on the edge of the box cover through multiple press buckles. When pressed, all the buckles exert force simultaneously, firmly fixing the box cover to the box body. These designs not only enhance sealing, but also to some extent prevent users from spilling soup due to improper operation during the opening process.

　　细节决定成败，一次性外卖打包盒的防漏设计正是如此。从盒体盒盖的密封结构，到盒体本身的构造、材质选择，再到盒盖开启方式，每一个环节的精心设计，都是为了守护好餐食的 “完整性”，让消费者拿到外卖时，感受到的是一份贴心与安心。

　　Details determine success or failure, and the leak proof design of disposable takeaway packaging boxes is just like that. From the sealing structure of the box body and lid, to the construction and material selection of the box body itself, to the opening method of the lid, every carefully designed step is aimed at safeguarding the "integrity" of the food, allowing consumers to feel a sense of care and peace of mind when receiving takeout.

　　本文由食品包装礼盒友情奉献.更多有关的知识请点击://www.tenshiro.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

　　This article is a friendly contribution from food packaging boxes For more information, please click: //www.tenshiro.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message